Mark Holdhusen

Professor

CSEPA
(715) 261-6299
mark.holdhusen@uwc.edu
381-D

Publications:

JOURNAL ARTICLES

  • Holdhusen, Mark Horner; Cunefare, Kenneth A., “Damping effects on the state-switched absorber used for vibration suppression,” Journal of Intelligent Material Systems and Structures, v 14, p 551-561, 2003.
  • Kenneth A. Cunefare, Van B. Biesel, John Tran, Ryan Rye, Aaron Graf, Mark Holdhusen, and Anne-Marie Albanese, “Anechoic chamber qualification: Traverse method, inverse square law analysis method, and nature of test signal,” Journal of the Acoustical Society of America, Volume 113, pp. 881-892, 2003.
  • Holdhusen, Mark and Cunefare, Kenneth, “A State-Switched Absorber Used for Vibration Control of Continuous Systems,” Journal of Vibration and Acoustics, Volume 129, Issue 5, page 577, October 2007.
  • Holdhusen, Mark and Cunefare, Kenneth, “Investigation of the Two-state, Maximum Work Extraction Switching Rule of a State-switched Absorber for Vibration Control,” Journal of Intelligent Material Systems and Structures, Volume 19, page 1245, November 2008.
  • Holdhusen, Mark and Cunefare, Kenneth, “Experimental Vibration Control of a Single-Degree of Freedom System Using a State-Switched Absorber,” Journal of Intelligent Material Systems and Structures, Volume 19, page 1435, December 2008.

CONFERENCE PRESENTATIONS AND PROCEEDINGS

Presentations with Refereed Proceedings

  • Holdhusen, Mark H.; Cunefare, Kenneth A., “Experimental vibration control of a two-degree of freedom, state-switched absorber system,” American Society of Mechanical Engineers, Dynamic Systems and Control Division, v 71, p 421-427, 2002.
  • Holdhusen, Mark and Cunefare, Kenneth, “Experimental Validation of a State-Switched Absorber Used to Control Vibrating Continuous Systems”, Proceedings of the American Society of Mechanical Engineers International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, DETC2005-85021, 2005.
  • Holdhusen, Mark, “Design of an engineering graphics course for a pre-engineering program”, Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Chicago, Illinois, 2006-1051, 2006.
  • Holdhusen, Mark, “The efficacy of an engineering graphics course for both students with and without prior engineering graphics experience,” Proceedings of the American Society for Engineering Education Annual Conference, Honolulu, Hawaii, 2007.
  • Holdhusen, Mark; James-Byrnes, Christa; and Rodriguez, Luis, ”Lesson study for a distance education statics course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Pittsburgh, PA, June 22 - 25, 2008.
  • Holdhusen, Mark, “Assessment of delivery modes of an engineering graphics course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Austin, TX, June 14 – 17, 2009.
  • Byrnes, Christa and Holdhusen, Mark, “Development and Delivery of a Project-Based Introductory Engineering Course for Online Delivery,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, San Antonio, TX, June, 2012. (Won First-year Programs Division Best Paper Award – 3rd Place.)
  • Douglas, Jamie and Holdhusen, Mark, “Development of Low-Cost, Hands-On Lab Experiments for an Online Mechanics of Materials Course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Atlanta, GA, June, 2013.
  • Holdhusen, Mark, “A ‘flipped’ statics classroom,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Seattle, WA, June, 2015.

Presentations with Proceedings

  • Holdhusen, M.; Cunefare, K.A.; Larson, G., “The role of damping in the state-switched absorber for vibration control,” Proceedings of SPIE - The International Society for Optical Engineering, v 4326, p 232-242, 2001.
  • Holdhusen, M.; Cunefare, K.A., “Optimization of location and tuning of the state-switched absorber for controlling the vibration of a beam,” Proceedings of the SPIE - The International Society for Optical Engineering, v 5049, p 404-13, 2003.
  • Holdhusen, M. H.; Cunefare, K.A., “Optimization of a state-switched absorber applied to a continuous vibrating system,” Proceedings of the SPIE - The International Society for Optical Engineering, 5386-38, 2004.
  • Holdhusen, M. H.; Cunefare, K.A., “Investigation of the two-state, maximum work extraction switching rule of the state-switched absorber for vibration control,” The 2004 International Symposium on Active Control of Sound and Vibration, 2004.
  • Byrnes, Christa and Holdhusen, Mark, “Development and Delivery of a Project-Based Introductory Engineering Course for Online Delivery,” ASEE North Midwest Section Meeting, Duluth, MN, 2011
  • Douglas, Jamie and Holdhusen, Mark, “Development of Low-Cost, Hands-On Lab Experiments for an Online Mechanics of Materials Course,” ASEE North Midwest Section Meeting, St. Cloud, MN, 2012.

Presentations with Abstracts

  • Mark Holdhusen, Kenneth A. Cunefare, and Gregg Larson, “Experimental validation of the state-switched absorber for two-component harmonic forcing,” Journal of the Acoustical Society of America, v 109, p 2351, 2001.
  • Kenneth A. Cunefare, Van Biesel, Anne-Marie Albanese, Lisa Chang, and Mark Holdhusen, “Source dependency on anechoic chamber validation,” Journal of the Acoustical Society of America, v 109, p 2453, 2001.
  • Mark Holdhusen and Kenneth Cunefare, “Optimization of a state-switched absorber applied to a vibrating continuous system,” Journal of the Acoustical Society of America, v 113, p 2227, 2003.
  • Kenneth A. Cunefare, Van Biesel, Mark Holdhusen, Austin Shoemaker, “Design features for free-field qualification of a new semi-anechoic room, and qualification performance,” Journal of the Acoustical Society of America, v 114, p 2440, 2003.
  • Holdhusen, Mark, “Space-dependent damping for reducing vibration of continuous systems”, Journal of the Acoustical Society of America, v 119, p 3298, 2006.
  • Holdhusen, Mark, “Space-dependent damping for reducing vibration of continuous systems”, 151st Meeting of the Acoustical Society of America, Providence, Rhode Island, 2006.
  • Holdhusen, Mark, “An inexpensive approach to measure one-third octave reverberation times,” 158th Meeting of the Acoustical Society of America, San Antonio, Texas, October 2009.
  • Holdhusen, Mark, “Yeast flocculation using acoustic agglomeration,” 171st meeting of the Acoustical Society of America, Salt Lake City, UT, May, 2016.


Education:

Ph.D. in Mechanical Engineering, Georgia Institute of Technology, May 2005.

M.S. in Mechanical Engineering, Georgia Institute of Technology, August 2002.

B.M.E. with high distinction, University of Minnesota, August 1999.



Links: