iTouch/iPhone Wireless Setup
In order to use the campus wireless network on your iPhone or
iPod Touch, it must be updated to firmware version 2.0 or better. If
you need to upgrade, the update is available directly from the
iPhone or iTouch settings in iTunes.
IMPORTANT: The first time you connected
to the UWSP wireless network, your iTouch/iPhone was set up to cache
your password. When you change your UWSP password your
iTouch/iPhone will attempt to connect using the old cached password,
which may result in your account becoming locked. To work around
this, after you have changed your password for UWSP, change your
password for UWSPWIRELESS on your iTouch/iPhone.
To change your password on your iTouch/iPhone for UWSPWIRELESS
click the "Settings" icon on your iTouch/iPhone. Then choose
"Wi-Fi" and click on the blue arrow for UWSPWIRELESS. Click on
"Forget this Network", and then follow the setup instructions below
starting at step 3.
-
Select the settings icon from your iPhone or iTouch home screen.
Select the Wi-Fi tab
-
Turn on Wi-Fi and select the UWSPWIRELESS network. If you are
located at Treehaven select the TREEHAVEN network.
-
When prompted for a Username and Password, enter your UWSP logon
and password. Select Join.
-
Click Accept to the security certificate prompt.
-
You should be returned to the Wi-Fi screen. You will see the UWSP
wireless network has been highlighted with a check mark next to it.
You are now connected and ready to use the internet.
